HPS

HPS cold air intake system relocates the filter outside of the engine compartment to deliver cool air inlet temperatures. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. By tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders and this tuning allows HPS Cold Air Intake to deliver large power gains. With the in-house dyno, HPS also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light.
Constructed of light weight mandrel-bent aluminum alloy piping, HPS Cold Air Intake has long lasting durability. All HPS Cold Air Intake Systems come with the HPS signature reinforced silicone hoses, which ensure the durability and reliability during the extreme driving condition.
Some of the HPS cold air intake kit has been designed to be used in two different configurations. In the case of inclement weather, the cold air tube can be removed and the filter can be clamped onto the short ram tube located in the engine compartment as shown above, to avoid the possibility of ingesting water into the engine.

HPS Cold Air Intake Key Features

	Dyno-Proven Performance with Safe Air/Fuel Ratio Stock Intake Baseline: Power - 77.3 whp, Torque - 73.4 Ft/lbs HPS Cold Air Intake: Peak Power - 79.6 Whp, Torque - 74.6 Ft/lbs Max Power Gain @ 6,345 rpm - 3.7 Whp Max. Torque Gain @ 5,750 rpm - 2.7 Ft/Lbs
	The world's best K&N high performance air filter Each HPS air intake comes with the world's best K&N high performance air filter. K&N air filter has the high flow performance as well as the exceptional filtering power. The use of K&N air filter allows HPS air intake to deliver the unmatch quality and performance.
	Race-Proven HPS Silicone Hoses Originally engineered for racing application, HPS high temperature performance silicone hoses are used in all HPS air intake kit to maintain the air intake working in its peak performance during the extreme driving condition or racing competition.
	HPS Stainless Steel T-Bolt Clamps The Stainless T-bolt Clamps are used in the HPS air intake kit due to their strength and reliability.

2009 TOYOTA YARIS 1.5L L4 F/I - All
2008 TOYOTA YARIS 1.5L L4 F/I - All
2007 TOYOTA YARIS 1.5L L4 F/I - All
2006 TOYOTA YARIS 1.5L L4 F/I - All